Sequence security record

As of 19 Nov 2026, Sequence has 3 audit reports by 1 security firm on Trustblock; the latest is by Quantstamp, dated 2 Dec 2025. Those reports list no open critical findings.

Critical findings
No open critical findings
Across 3 reports.
Open the latest report
Your label, live
Get the label for your site

Record last updated . It holds audits and findings, contracts and incidents up to Nov 2026. Trustblock does not review code.

Audits3

Newest first

ReportSecurity firmDateScopeCritical findingsSource
Sequence - Identity DocumentSecurity firm: QuantstampDate: Scope: Not recorded; see the reportNone opencertificate.quantstamp.com ↗
SequenceSecurity firm: QuantstampDate: Scope: Files listedNone opencertificate.quantstamp.com ↗
Sequence Smart WalletSecurity firm: QuantstampDate: Scope: Files listedNone opencertificate.quantstamp.com ↗

Findings71

Statuses are the security firm’s own, from each report.

SeverityOpenAcknowledgedFixedMitigated
Critical0000
High0090
Medium01160
Low08101

Marked Informational or Undetermined by the firms. Not counted as findings.

InformationalBind HTTP Server to a Specific Network InterfaceSequence - Identity Document · Quantstamp · 2 Dec 2025Acknowledged

The HTTP server is instantiated using `http.ListenAndServe(":9999", svc)` (`/identity-instrument-master/cmd/builder-mock/main.go`, line 11\) in Go, which binds the server to all available network interfaces (`0.0.0.0`). This means the service is accessible from any network the host is connected to, including public or unintended internal networks, depending on the host's network configuration and firewall settings. This broad exposure increases the attack surface unnecessarily and may lead to unintentional service discovery, unauthorized access attempts, or abuse if firewall rules or access controls are misconfigured or absent. Binding to all interfaces is appropriate only in explicitly controlled environments (e.g., behind a reverse proxy or inside a secured container network), and even then, least-privilege design dictates narrowing exposure whenever possible.

Open the report
InformationalCapture and Persist Operating System Logs Past the Lifetime of a ContainerSequence - Identity Document · Quantstamp · 2 Dec 2025Acknowledged

In linux systems, important operating system logs are stored in the `/var/log` subfolder. This folder should always be made available to the host through a volume, so that log tracking and log analysis systems can capture them.

Open the report
InformationalConsider if Auth Key Maximum Ttl (90 Days) Is NeededSequence - Identity Document · Quantstamp · 2 Dec 2025Acknowledged

The current implementation allows authentication keys (`auth_key`) to have a maximum time-to-live (TTL) of up to 90 days. Long-lived credentials significantly increase the risk window for attackers: if the `auth_key`'s private key is leaked, phished, or otherwise compromised, it can be used for up to 90 days without requiring re-authentication. This undermines the security posture of the system, especially for sensitive operations or high-value accounts. Consider if 90 days TTL is needed; otherwise, consider lowering it to a week.

Open the report
InformationalDo Not Mount the Host's `docker.sock` for Any Docker ContainerSequence - Identity Document · Quantstamp · 2 Dec 2025Acknowledged

It is possible to mount the `docker.sock` interface to a container. This enables the 'Docker within Docker' scenario, but also poses a security risk, since common Docker operations on the host are then exposed to the container.

Open the report
InformationalDocker Compose Requires Logging Size ProtectionSequence - Identity Document · Quantstamp · 2 Dec 2025Acknowledged

Each Docker container is producing logs, which can be accessed via the command `docker logs <CONTAINER_ID>`. These logs grow over time, and it is recommended to limit the log file sizes in the Docker system and rotate them. The recommendation is to limit the number of files by 10, and let each file be at most 200MB big.

Open the report
InformationalDocker Containers Run Their Commands as RootSequence - Identity Document · Quantstamp · 2 Dec 2025Acknowledged

When creating a Docker container, it is possible to set the user who is actually running the application and any command on the container. It is important to specifically use the `USER` directive in any Dockerfile to ensure that the user is not root and has unnecessary privileges.

Open the report
InformationalDocker-Compose Should Have a Restart Policy SpecifiedSequence - Identity Document · Quantstamp · 2 Dec 2025Acknowledged

The user should always specify the way containers are supposed to behave when an error is encountered. One mechanism is by specifying the restart policy. For each container, it is best practice to specifically set the `restart` key.

Open the report
InformationalEnable Bucket Logging for S3 BucketsSequence - Identity Document · Quantstamp · 2 Dec 2025Acknowledged

Logging access to any resources is a vital pillar for security. Hence, it is important that every S3 Bucket resource is set up with a proper logging configuration.

Open the report
InformationalEnable Versioning on S3 BucketsSequence - Identity Document · Quantstamp · 2 Dec 2025Acknowledged

S3 buckets allow for versioning of the objects stored in it, and it is generally recommended to enable it since it allows access to historical versions of objects. In older versions of Terraform, this was done inline within the bucket resource definition. This inline definition is deprecated in favor of an external resource definition. This check catches the use of the deprecated method.

Open the report
InformationalEnsure to Have a Backup Plan for Ec2 InstancesSequence - Identity Document · Quantstamp · 2 Dec 2025Acknowledged

When using EC2 instances, it is recommended to ensure that the attached EBS volume is being backed up regularly.

Open the report
Show 10 more
InformationalHave Healthcheck Parameters in DockerfilesSequence - Identity Document · Quantstamp · 2 Dec 2025Acknowledged

Dockerfiles have an instruction called `HEALTHCHECK`. It enables a user to define a command to figure out if the program(s) running inside the container are working properly. It is generally advisable to have healthchecks in place to assist monitoring of running containers.

Open the report
InformationalNon-Secp256k1 Signers Should Be Rejected Early OnSequence - Identity Document · Quantstamp · 2 Dec 2025Acknowledged

Non-secp256k1 signatures are not supported in the system, but are currently rejected only at the `CompleteAuth` stage.

Open the report
InformationalPin Versions of Packages Installed in a Docker ImageSequence - Identity Document · Quantstamp · 2 Dec 2025Acknowledged

One desirable goal of docker images is that changing their Docker-files and re-building them in the future does not cause issues unrelated to the new changes. One way an image may not build in the future is if the Dockerfile contains instructions to install a certain program/library without pinning the version.

Open the report
InformationalRoot Port Usage Increases Attack SurfaceSequence - Identity Document · Quantstamp · 2 Dec 2025Acknowledged

Ports should fall within the 0-65535 range. However, both the ingress proxy and the identity instrument services do not enforce a range. The usage of non-root ports, i.e., those less than 1024, is not enforced either. This means that both binaries must be executed with root privileges, increasing the attack surface.

Open the report
InformationalServe OWASP Recommended Headers with Each RequestSequence - Identity Document · Quantstamp · 2 Dec 2025Acknowledged

The custom-built proxy (`/identity-instrument-master/cmd/ingress-proxy/main.go`) fails to set several critical HTTP response headers recommended by OWASP for web application security. These headers are intended to instruct browsers on how to behave when rendering content, limiting the attack surface for common exploits like XSS, clickjacking, MIME-sniffing, and resource abuse. Since this is a custom proxy implementation, these protections must be explicitly coded in, unlike in production-ready reverse proxies (e.g., NGINX or Envoy) where secure defaults or plugins are available. Without these headers, end-user browsers are left to infer behavior on their own — potentially enabling risky defaults that attackers can exploit, especially when serving dynamic or unauthenticated content.

Open the report
InformationalSet Limited Capabilities for Containers in Docker ComposeSequence - Identity Document · Quantstamp · 2 Dec 2025Acknowledged

Containers are spun up with operating system level capabilities, and the default set is most of the time above the needs of that specific container.

Open the report
InformationalMissing Events to Signal State ChangesSequence · Quantstamp · 12 Jan 2024Acknowledged

Events are important for signalling state changes in a contract. This helps debug the contract in the event of any attacks or critical bugs and helps indicate to users any configuration changes in the contract. A non-exhaustive list of functions where events can be useful includes: 1. `ERC20Items.setNameAndSymbol()` 1. `ERC721BaseToken.setNameAndSymbol()` 1. `ERC721BaseToken.setBaseMetadataURI()` 1. `ERC721BaseToken.setContractURI()` 1. `ERC1155BaseToken. setBaseMetadataURI()` 1. `ERC1155BaseToken.setContractName()` 1. `ERC1155BaseToken.setContractURI()`

Open the report
InformationalUnlocked PragmaSequence · Quantstamp · 12 Jan 2024Acknowledged

Every Solidity file specifies in the header a version number of the format `pragma solidity (^)0.8.*`. The caret (`^`) before the version number implies an unlocked pragma, meaning that the compiler will use the specified version and above, hence the term "unlocked". The pragma versions used throughout the codebase should not be unlocked and set to the same version to ensure that they are all compiled by the same compiler version.

Open the report
UndeterminedUser Can Create Several Offers Without Giving AllowanceSequence · Quantstamp · 12 Jan 2024Acknowledged

When a user creates an offer, `_createOrder()` verifies that enough allowance was provided to cover the new order. However, he can create more offers as long as their total amount is equal or less than the allowance of the contract. `isOrderValid()` can be affected as well, as it verifies each order independently.

Open the report
InformationalMissing Return ValuesSequence Smart Wallet · Quantstamp · 18 Feb 2021Acknowledged

Function `isValidSignature ` in `ModuleAuth` is missing a return statement for the else branch. While this does not pose a problem in the current system, a future potential caller attempting to decode the returned byte value may fail.

Open the report
Show 6 more
InformationalUnhandled OverflowsSequence Smart Wallet · Quantstamp · 18 Feb 2021Acknowledged

As pointed by an internal code review of the 0xSequence wallet contributors, there are unhandled possible overflows on lines `LibBytes.sol#146` and `LibBytes.sol#185`. Quantstamp confirmed that the calls currently made to the functions in question cannot reach the overflow state, this does not need to be the case for future uses of these function.

Open the report
Informational'Dead' CodeSequence · Quantstamp · 12 Jan 2024Fixed

"Dead" code refers to code which is never executed and hence makes no impact on the final result of running a program. Dead code raises a concern, since either the code is unnecessary or the necessary code's results were ignored. 1. `ERC1155Sale._ERC20_TRANSFERFROM_SELECTOR` is never used in `ERC1155Sale`. 2. `ERC721Sale._ERC20_TRANSFERFROM_SELECTOR` is never used in `ERC721Sale`.

Open the report
InformationalDeprecated FunctionsSequence · Quantstamp · 12 Jan 2024Fixed

Several initializers in the codebase call `_setupRole()` to assign privileged roles to certain addresses, instead of using `_grantRole()`. Both functions have the same effect, as `_setupRole()` just calls `_grantRole()`. `_setupRole()` will be deprecated in `v5.0.0` of OpenZeppelin contracts, and its use is not recommended in the current version used by the codebase (`v4.9.3`). See `_setupRole()` comment: ``` NOTE: This function is deprecated in favor of {_grantRole}. ```

Open the report
InformationalGas Optimization: Cache VariablesSequence · Quantstamp · 12 Jan 2024Fixed

Repeatedly accessing certain variables can be gas-intensive. To optimize gas usage, values frequently accessed should be stored in memory variables. Consider storing the value in a memory variable and reference the memory variable for the following variables: 1. `requests.length` from `Orderbook.createOrderBatch()` 2. `ordersIds.length` from `Orderbook.acceptOrderBatch()` 3. `ordersIds.length` from `Orderbook.getOrderBatch()` 4. `ordersIds.length` from `Orderbook.isOrderValidBatch()`

Open the report
InformationalGas Optimization: Use `calldata` Instead of `memory`Sequence · Quantstamp · 12 Jan 2024Fixed

Solidity's `calldata` is a read-only byte-addressable space where function arguments reside. It is more cost-effective to employ `calldata` over `memory`. This is because `calldata` is not stored in memory but is directly accessed from the function call data, resulting in gas savings. It is recommended to change the `memory` to `calldata` in the mentioned functions: 1. `createOrder()` 2. `createOrderBatch()` 3. `_createOrder()` 4. `acceptOrder()` 5. `_acceptOrder()` 6. `acceptOrderBatch()` 7. `getOrderBatch()` 8. `cancelOrderBatch()` 9. `isOrderValidBatch()`

Open the report
InformationalOutdated CommentsSequence · Quantstamp · 12 Jan 2024Fixed

In several factory contracts, the following comment can be found: ``` @dev As `proxyOwner` owns the proxy, it will be unable to call the [...] functions. ``` However, the Sequence factories implement a modified Transparent Proxy pattern, where the administrator can also call the implementation, apart from the administration functions.

Open the report

Contracts

No deployed address is recorded for these audits.

The reports name a repository or files. Open a report to see its scope.

The repositories and files the reports name

Show this on your site

Is this your project? Show this record on your own website. The label states what the record holds, links to this page and updates by itself. It is free and needs no sign-in.

Content

Facts

Automatic: the three strongest facts of this project’s own record (its last audit and two more), highlighted. They update with the record. Picking a fact turns Automatic off.

Fixed as
Language

Style

Layout
Theme
Accent
Corners

Format

Size
Date
Embed as
HTML
<head>
<script src="https://widget.trustblock.run/project-widget.min.js" defer></script>
</head>
<body>
<div
data-tb-project-widget
data-tb-project-slug="sequence"
></div>
</body>

Paste the code where the label should appear. It uses no API credit and updates by itself.

Something wrong on this page? A missing report, a wrong date, a finding that was fixed since. Tell us and we check it against its source.

Tell us