Drive Crypto contract 0x61cc…de7d on BNB Chain

0x61ccf5351d63b36ae2f7f4d0f0f9a65989c1de7d

As of 21 Nov 2026, Trustblock’s record holds 0x61ccf5351d63b36ae2f7f4d0f0f9a65989c1de7d on BNB Chain as a contract of Drive Crypto. 1 audit report on Trustblock lists this address: CertiK, 21 Nov 2022. 17 findings in it are recorded as open or acknowledged.

Audit reports that list this address1

Each report’s scope as stored on Trustblock names this address on BNB Chain.

AuditSecurity firmDateCommit named in the reportReport
Drive CryptoCertiKNot recorded (see the report)Open

Open and acknowledged findings in these reports17

4 High, 3 Medium, 10 Low. In the firm’s own words; statuses are the firm’s, from each report.

HighCentralization Related Risks In AttributeMap.solDrive Crypto · CertiKAcknowledged

In the contract `Authorized`, the role `Withdrawer` has authority over the following functions: - function `safeApprove()`, to set `amount` as the allowance of `spender` over the `owner` s tokens. - function `safeTransfer`, to transfer tokens to the receiver. - function `safeWithdraw()`, to transfer all ETH in the contract to the `msgSender()`. Any compromise to the `Withdrawer` account may allow a hacker to take advantage of this authority. In the contract `Authorized`, the role `Admin` has authority over the following functions: - function setPermission(), to set the permission for the wallet account. Any compromise to the `Admin` account may allow a hacker to take advantage of this authority. In the contract `AttributeMap`, the role `Financial` has authority over the following functions: - function setExemptFee(), to include/exclude the `target` address to/from the fee. - function setExemptFeeReceiver(), to exempt the `target` address from the the fee receiver. - function setExemptTxLimit(), to exempt the `target` address from the transaction limit. - function setExemptAmountLimit(), to exempt the `target` address from the transaction amount limit. - function setExemptOperatePausedToken(), to exempt the `target` address from the operation. - function setSpecialFeeWallet(), to set enable/disable the special fee for the `target` address. - function setSpecialFeeWalletReceiver(), to enable/disable the special fee wallet receiver for the `target` address. - function setExemptSwapMaker(), to exempt the `target` address from the swap maker. - function setExemptReward(), to exempt the `target` address from the reward. Any compromise to the `Financial` account may allow a hacker to take advantage of this authority.

The audit on Trustblock · Open the report
HighCentralization Related Risks In DriveCrypto.solDrive Crypto · CertiKAcknowledged

In the contract `DriveCrypto`, the role `Admin` has authority over the following functions: - function enableToken(), to update the status of `pauseToken`. - function setLiquidityPool(), to set the liquidity pair address. - function setSecondaryPair(), to set the secondary pair address. - function setPausedSwapFee(), to pause/restart the swap fee. - function setDisabledReward(), to enable/disable the rewards. - function setRewardWithdrawWaitTime(), to set the waiting time for withdrawing rewards. - function setAdministrativeWallet(), to set the administrative wallet address. - function setInternalFundWallet(), to set the internal fund wallet address. Any compromise to the `Admin` account may allow a hacker to take advantage of this authority. In the contract `DriveCrypto`, the role `Financial` has authority over the following functions: - function setContractFees(), to set the contract fees. - function setSpecialWallet(), to set the contact fees. - function setSpecialWalletFeeOnSend(), to set the special wallet fee on send. - function setSpecialWalletFeeOnReceive(), to set the special wallet fee on receive. - function setMaxTxAmount(), to set them maximum transaction amount. - function setMaxAccountAmount(), to set the maximum account amount. - function setMinAmountToAutoSwap(), to set the minimum swap amount. Any compromise to the `Financial` account may allow a hacker to take advantage of this authority. In the contract `DriveCrypto`, the role `Controller` has authority over the following functions: - function buyBackAndHoldWithDecimals(), to buy back `DRIVECRYPTO` tokens to the `receiver` address via `WBNB`. - function buyBackAndBurnWithDecimals(), to buy back `DRIVECRYPTO` tokens to the DEAD address via `WBNB`. - function setMaxSellAmount(), to set the maximum sell amount. Any compromise to the `Controller` account may allow a hacker to take advantage of this authority. In the contract `GasHelper`, the role `Admin` has authority over the following functions: - function setSwapFee(), to set the swap fee. - function blackList(), to add the `_user` address to the blacklist. - function removeFromBlacklist(), to remove the `_user` address from the blacklist. Any compromise to the `Admin` account may allow a hacker to take advantage of this authority.

The audit on Trustblock · Open the report
HighCentralization Risks in SwapHelper.solDrive Crypto · CertiKAcknowledged

In the contract `SwapHelper` the role `_owner` has authority over the functions shown in the diagram below. - function safeApprove(), to set `amount` as the allowance of `spender` over the `owner` s tokens. - function safeWithdraw(), to transfer all ETH in the contract to the `msgSender()`. Any compromise to the `_owner` account may allow the hacker to take advantage of this authority

The audit on Trustblock · Open the report
HighLogic Issue On Function `burn()`Drive Crypto · CertiKAcknowledged

The `totalTokens` and `holderMap` will get updated when transferring tokens. However, they are not updated in the function `burn()`. So the holder still can get the accumulated rewards.

The audit on Trustblock · Open the report
MediumIncorrect initialization Of the `_permissions`Drive Crypto · CertiKAcknowledged

As per the comments, it is used to exempt the accounts `administrativeWallet` and `internalFundWallet` from the fee limit. However, the variable `_permission` instead of `_attributeMap` is initialized.

The audit on Trustblock · Open the report
MediumInitial Token DistributionDrive Crypto · CertiKAcknowledged

All of `DRIVECRYPTO` Tokens are sent to the contract deployer when deploying the contract. This could be a centralization risk as the contract deployer can distribute tokens without obtaining the consensus of the community.

The audit on Trustblock · Open the report
MediumPotential Loss of RewardsDrive Crypto · CertiKAcknowledged

In the function `_updateHoldler()`, if the holder has less than the `minToneHolder` tokens, the holder will be removed from the `holderMap` list. If the holder does not call the function `withdraw()` to withdraw the rewards before transferring tokens, he/she will lose the previous rewards. ```solidity=433 function _updateHolder(address holder, uint256 amount, uint minTokenHolder, uint stakePerShareValue, uint stakePrecisionValue) private { // If holder has less than minTokenHoldToStake, then does not participate on staking uint256 considerateAmount = minTokenHolder <= amount ? amount : 0; uint256 holderAmount = holderMap[holder].amountToken; if (holderAmount > 0) calculateDistribution(holder, holderAmount, stakePerShareValue, stakePrecisionValue); if (considerateAmount > 0 && holderAmount == 0 ) { addToHoldersList(holder); } else if (considerateAmount == 0 && holderAmount > 0) { removeFromHoldersList(holder); } ... } ```

The audit on Trustblock · Open the report
LowLack of reasonable boundaryDrive Crypto · CertiKOpen

The variables `_maxTxAmount`, `_maxAccountAmount`, `_minAmountToAutoSwap`, and `minTokenHoldToStake` do not have reasonable boundaries, so they can be given arbitrary values after deploying.

The audit on Trustblock · Open the report
LowMissing Receive FunctionDrive Crypto · CertiKOpen

The owner account can call the function `safeWithdraw()` to withdraw all ETHs. However, there is no `receive()` or `fallback()` function in the SwapHelper.sol, so this contract cannot receive native tokens.

The audit on Trustblock · Open the report
LowNo Function To Disable TokenDrive Crypto · CertiKOpen

The admin can call the function `enableToken()` to set the `pauseToken` to false, however, there is no function to set the `pauseToken` to true.

The audit on Trustblock · Open the report
LowPotential Flashloan AttackDrive Crypto · CertiKOpen

Flash loans are a way to borrow large amounts of money for a certain fee. The requirement is that the loans need to be returned within the same transaction in a block. If not, the transaction will be reverted. An attacker can use the borrowed money as the initial funds for an exploit to enlarge the profit and/or manipulate the token price in the decentralized exchanges. We find that the function `executeSwap()` rely on price calculations that are based on-chain, meaning that they would be susceptible to flash-loan attacks by manipulating the price of given pairs to the attacker's benefit.

The audit on Trustblock · Open the report
LowPotential Gas ExhaustionDrive Crypto · CertiKOpen

The `for` loop within the function `multiTransfer()` takes unbounded arrays' lengths as the maximum iteration times. If the size of the array `users` grows large, iterating through the entire array could be an expensive operation. Even worse, it could exceed the gas limit per block.

The audit on Trustblock · Open the report
LowPotential Sandwich AttacksDrive Crypto · CertiKOpen

A sandwich attack might happen when an attacker observes a transaction swapping tokens or adding liquidity without setting restrictions on slippage or minimum output amount. The attacker can manipulate the exchange rate by frontrunning (before the transaction being attacked) a transaction to purchase one of the assets and make profits by backrunning (after the transaction being attacked) a transaction to sell the asset. The following functions are called without setting restrictions on slippage or minimum output amount, so transactions triggering these functions are vulnerable to sandwich attacks, especially when the input amount is large: ```solidity=337 uint256 wbnbAmount = getAmountOut(totalAmount, reserve1, reserve0); swapToken(liquidityPair, reversed ? 0 : wbnbAmount, reversed ? wbnbAmount : 0, secondaryPairLocal); uint256 wbnbBalanceNew = getTokenBalanceOf(wbnbAddress, secondaryPairLocal); require(wbnbBalanceNew == wbnbBalanceBefore + wbnbAmount, "Wrong amount of swapped on WBNB"); ``` ```solidity=349 uint256 busdAmount = getAmountOut(amountOut, reserve1, reserve0); swapToken(secondaryPairLocal, reversed ? 0 : busdAmount, reversed ? busdAmount : 0, swapHelper); uint256 busdBalanceNew = getTokenBalanceOf(busdAddress, swapHelper); require(busdBalanceNew == busdBalanceBefore + busdAmount, "Wrong amount of swapped on BUSD"); amountOut = busdAmount; ```

The audit on Trustblock · Open the report
LowThird Party DependencyDrive Crypto · CertiKOpen

The contract is serving as the underlying entity to interact with one or more third-party protocols. The scope of the audit treats third-party entities as black boxes and assumes their functional correctness. However, in the real world, third parties can be compromised and this may lead to lost or stolen assets. In addition, upgrades of third parties can possibly create severe impacts, such as increasing fees of third parties, migrating to new LP pools, etc. ```solidity=19 address constant private WBNB = 0xbb4CdB9CBd36B01bD1cBaEBF2De08d9173bc095c; // BSC WBNB address constant private BUSD = 0xe9e7CEA3DedcA5984780Bafc599bD69ADd087D56; // BSC BUSD ``` ```solidity=88 PancakeRouter router = PancakeRouter(0x10ED43C718714eb63d5aA57B78B54704E256024E); // BSC ``` - The function `DriveCrypto.constructor` interacts with third party contract with `PancakeFactory` interface via `router`.

The audit on Trustblock · Open the report
LowUnchecked ERC-20 `transfer()`/`transferFrom()` CaDrive Crypto · CertiKOpen

The return value of the transfer()/transferFrom() call is not checked. ```solidity=12 function safeTransfer(address token, address receiver, uint256 amount) external isWithdrawer { IERC20(token).transfer(receiver, amount); } ```

The audit on Trustblock · Open the report
LowUnused Return ValueDrive Crypto · CertiKOpen

The return value of an external call is not stored in a local or state variable. ```solidity=11 function safeApprove(address token, address spender, uint256 amount) external isWithdrawer { IERC20(token).approve(spender, amount); } ``` --- ```solidity=11 function safeApprove(address token, address spender, uint256 amount) external onlyOwner { IERC20(token).approve(spender, amount); } ```

The audit on Trustblock · Open the report
LowVariables That Could Be Declared as ImmutableDrive Crypto · CertiKOpen

The linked variables assigned in the constructor can be declared as `immutable`. Immutable state variables can be assigned during contract creation but will remain constant throughout the lifetime of a deployed contract. A big advantage of immutable variables is that reading them is significantly cheaper than reading from regular state variables since they will not be stored in storage.

The audit on Trustblock · Open the report

The Drive Crypto security record · Every Drive Crypto address · This address on the explorer